Mitsubishi MR-J4-40GF Servo Drive
PRODUCT DESCRIPTION
Mitsubishi MR-J4-40GF Servo Amplifier
Mitsubishi MR-J4-40GF Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.4 kW (400 W) and features an integrated CC-Link IE Field Network interface for communication with compatible industrial controllers.
The MR-J4-40GF is suitable for applications requiring accurate positioning, coordinated motion control, and reliable servo motor operation. Typical applications include automated assembly equipment, packaging machinery, material handling systems, and production machinery configured for CC-Link IE Field Network communication.
Product Overview
Mitsubishi MR-J4-40GF functions as the power and motion control unit between a compatible network controller and servo motor. It receives motion commands through CC-Link IE Field Network and regulates motor output according to the controller's commands and the configured operating parameters.
As part of the MELSERVO-J4 series, the MR-J4-40GF supports network-based servo control and advanced motion functions. Depending on the selected control mode and controller configuration, the system can support point-table positioning, speed control, torque control, and coordinated motion functions.
The amplifier also incorporates servo tuning, vibration suppression, and diagnostic functions to help optimize machine performance and simplify maintenance.
Model Identification
- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-40GF
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: CC-Link IE Field Network
- Rated Output Capacity: 0.4 kW (400 W)
Technical Specifications
Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-40GF
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.4 kW (400 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 2.8 A
Main Circuit Power Supply: 200–240 V AC, 50/60 Hz
Interface: CC-Link IE Field Network
Control Method: Sine-wave PWM control / current control
Network Communication: CC-Link IE Field Network
Setup and Monitoring: USB connection to a compatible PC using MR Configurator2
Interface Power Supply: 24 V DC ±10%
Cooling: Refer to the official model-specific installation documentation
Protection Rating: IP20, subject to the specified installation configuration
Dynamic Brake: Refer to the applicable model specification
Dimensions and Weight: Refer to the official dimensional drawing and specifications
Confirm the complete electrical ratings, permitted power supply configuration, cooling requirements, dimensions, and weight against the official MR-J4-GF documentation before ordering or commissioning.
Main Features
1. Integrated CC-Link IE Field Network
The MR-J4-40GF incorporates CC-Link IE Field Network communication, an Ethernet-based industrial network for connecting compatible controllers and automation equipment.
This interface enables integration into supported networked motion control architectures and can reduce the need for separate command wiring, depending on the system configuration.
2. Flexible Motion Control
The amplifier supports network-based servo control and positioning functions. When paired with a compatible controller or Simple Motion module, it can be integrated into applications requiring coordinated motion, speed regulation, or torque control.
Available operating modes and motion functions depend on the controller, network configuration, and selected operating mode.
3. Advanced Servo Tuning
The MELSERVO-J4 platform includes automatic tuning, one-touch tuning, resonance suppression filtering, and vibration suppression functions. These capabilities help technicians optimize servo response and improve machine performance under suitable operating conditions.
4. Diagnostic and Protective Functions
The amplifier provides diagnostic and protective functions to help identify abnormal operating conditions and support maintenance troubleshooting. Correct installation, parameter configuration, and compliance with the manufacturer's operating limits are essential for reliable operation.
Compatible Equipment / Accessories
Mitsubishi MR-J4-40GF is designed for use with compatible Mitsubishi Electric motion controllers, servo motors, and supporting accessories.
Potential equipment categories include:
- PLCs or network master modules supporting CC-Link IE Field Network.
- Compatible Mitsubishi Electric Simple Motion modules for supported coordinated motion functions.
- Compatible HG-series servo motors, subject to the official motor-amplifier combination table.
- Suitable industrial network cables and connectors.
- Compatible motor power and encoder cables.
- Control circuit power supplies and wiring accessories.
- Regenerative components where required by the application.
Compatibility must be verified against the exact controller model, network configuration, servo motor, encoder, cable specifications, and machine requirements.
Important: MR-J4-40GF uses CC-Link IE Field Network. It is not interchangeable solely on the basis of its 400 W rating with MR-J4-40A general-purpose interface models or MR-J4-40B SSCNET III/H models.
Typical Industrial Applications
Industrial Automation
Used in automated production equipment requiring network-connected servo control and integration with compatible industrial controllers.
Motion Control / Positioning
Suitable for positioning and coordinated motion applications using supported CC-Link IE Field Network control configurations.
Production Machinery
May be applied in assembly equipment, packaging machinery, inspection systems, and other production machines requiring precise servo-driven movement.
Networked Automation Systems
Suitable for industrial equipment where servo amplifiers communicate with a compatible controller through an Ethernet-based industrial network.
MR-J4-40GF Replacement & Maintenance
For maintenance, repair, replacement, or retrofit requirements, verify the complete servo amplifier model and existing machine configuration before selecting a replacement.
Before replacement, check:
- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- PLC or motion controller compatibility with CC-Link IE Field Network.
- Network wiring, connectors, and communication settings.
- Motor power cables and encoder connections.
- Parameter settings and motion control configuration.
- Existing alarm codes and unit condition.
A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, motor, network, and controller compatibility before installation.
Central Automation Solutions
Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.
NEW
Sourcing of new units, subject to stock availability and supplier confirmation.
REFURBISHED TESTED
Refurbished units that have undergone inspection and testing according to the available testing procedures.
REPAIR
Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.
REPLACEMENT
Assistance in identifying suitable replacement units based on the existing model, controller, and machine configuration.
SOURCING
Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.
Important Before Ordering
To help identify the correct Mitsubishi MR-J4-40GF servo amplifier, prepare the following information:
1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. PLC or motion controller model.
5. CC-Link IE Field Network configuration.
6. Photographs of connectors and wiring, if necessary.
7. Machine application and any existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.
Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.
Request Quotation
Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-40GF Servo Amplifier.
Please provide the complete part number, servo motor model, controller model, and equipment nameplate photograph when requesting a quotation.
Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.
