Mitsubishi MR-J4-40B-RJ Servo Drive

Mitsubishi MR-J4-40B-RJ Servo Drive
INDUSTRIAL AUTOMATION PRODUCT

Mitsubishi MR-J4-40B-RJ Servo Drive

Product Type: Servo Drive

Part Number: MR-J4-40B-RJ

Rp 19.500.000
New Refurbished Repair Replacement Sourcing
PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

Mitsubishi MR-J4-40B-RJ Servo Amplifier

Mitsubishi MR-J4-40B-RJ Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.4 kW (400 W) and uses the SSCNET III/H optical communication interface to connect with compatible Mitsubishi Electric motion controllers.

The MR-J4-40B-RJ is suitable for applications requiring accurate positioning, coordinated motion control, and reliable servo motor operation. Typical applications include automated assembly equipment, packaging machinery, positioning systems, and production machinery configured for SSCNET III/H communication.

Product Overview

Mitsubishi MR-J4-40B-RJ functions as the power and motion control unit between a compatible motion controller and servo motor. It receives motion commands through the SSCNET III/H network, processes control instructions, and regulates motor output according to the configured operating parameters.

As an RJ variant of the MELSERVO-J4-B series, this model supports additional encoder interface options for compatible load-side feedback configurations. These include specified two-wire and four-wire encoder communication methods and differential A/B/Z-phase input signals. The exact encoder and full-closed-loop configuration must comply with Mitsubishi Electric documentation.

The amplifier also incorporates advanced servo tuning, vibration suppression, diagnostic, and protective functions to support accurate motion control and machine maintenance.

Model Identification

- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-40B-RJ
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: SSCNET III/H, RJ variant
- Rated Output Capacity: 0.4 kW (400 W)

Technical Specifications

Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-40B-RJ
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.4 kW (400 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 2.8 A
Main Circuit Power Supply: 200–240 V AC, 50/60 Hz
Input Configuration: Single-phase or three-phase, subject to manufacturer specifications
DC Power Supply Input: 283–340 V DC, subject to model and software requirements
Interface: SSCNET III/H
Control Method: Sine-wave PWM control / current control
Communication: SSCNET III/H; USB connection for compatible PC setup and monitoring
Interface Power Supply: 24 V DC ±10%
Load-Side Encoder Interface: Supported differential A/B/Z-phase and specified serial encoder configurations
Encoder Communication: Supported two-wire and four-wire configurations, subject to encoder compatibility
Cooling: Natural cooling
Protection Rating: IP20, open type
Dynamic Brake: Built-in
Safety Function: STO, subject to applicable safety configuration
Dimensions and Weight: Refer to the official model-specific dimensional drawing and specifications

Verify the power supply configuration, encoder requirements, and exact ratings against the official MR-J4-B-RJ documentation before ordering or commissioning.

Main Features

1. SSCNET III/H Communication

The MR-J4-40B-RJ uses SSCNET III/H optical communication to connect with compatible Mitsubishi Electric motion controllers. This network supports high-speed communication and coordinated servo operation within compatible motion control systems.

2. Advanced External Encoder Interface

The RJ variant supports specified external encoder configurations, including differential A/B/Z-phase signals and supported serial communication methods. These capabilities can support compatible full-closed-loop systems using load-side feedback.

Encoder type, signal format, wiring, and controller configuration must be verified against Mitsubishi Electric requirements.

3. Advanced Servo Tuning and Vibration Suppression

The MELSERVO-J4 platform incorporates one-touch tuning, auto tuning, adaptive filtering, resonance suppression, and vibration suppression functions. These features help technicians optimize servo response and reduce mechanical vibration under suitable operating conditions.

4. Integrated Diagnostics and Safety

The amplifier provides protective functions for abnormal operating conditions and diagnostic capabilities to assist troubleshooting. It also supports Safe Torque Off (STO) according to the applicable safety specifications and installation requirements.

Correct wiring, safety configuration, and machine-level validation are necessary before operation.

Compatible Equipment / Accessories

Mitsubishi MR-J4-40B-RJ is designed for use with compatible Mitsubishi Electric motion controllers, servo motors, and accessories within an SSCNET III/H motion control system.

Potential equipment categories include:

- Mitsubishi Electric motion controllers supporting SSCNET III/H.
- Compatible HG-series servo motors, subject to the official motor-amplifier combination table.
- SSCNET III/H optical communication cables.
- Compatible motor power and encoder cables.
- Supported load-side encoders for applicable feedback configurations.
- Control circuit power supplies and wiring accessories.
- Regenerative components where required by the application.

Compatibility must be verified against the exact servo motor, motion controller, encoder, cable type, connectors, and machine requirements.

Important: MR-J4-40B-RJ uses SSCNET III/H. It is not interchangeable solely on the basis of its 400 W rating with MR-J4-40A-RJ general-purpose interface models or standard MR-J4-40B models. Confirm whether the RJ-specific encoder functions are required by the application.

Typical Industrial Applications

Industrial Automation

Used in automated production equipment requiring coordinated servo control through compatible Mitsubishi Electric motion controllers.

Motion Control / Positioning

Suitable for positioning and synchronized motion applications using SSCNET III/H communication.

Production Machinery

May be used in compatible assembly machines, packaging equipment, inspection machinery, and other production systems requiring precise servo-driven movement.

Full-Closed-Loop Applications

Can be considered for supported applications requiring external load-side encoder feedback, provided the encoder, wiring, controller, and control configuration meet the manufacturer's requirements.

MR-J4-40B-RJ Replacement & Maintenance

For maintenance, repair, replacement, or retrofit requirements, verify the complete servo amplifier model and existing machine configuration before selecting a replacement.

Before replacement, check:

- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- Motion controller compatibility with SSCNET III/H.
- Load-side encoder type and feedback configuration.
- Optical communication cables and connectors.
- Motor power cables and encoder wiring.
- Parameter settings and safety configuration.
- Existing alarm codes and unit condition.

A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, communication, motor, encoder, and safety compatibility before installation.

Central Automation Solutions

Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.

NEW

Sourcing of new units, subject to stock availability and supplier confirmation.

REFURBISHED TESTED

Refurbished units that have undergone inspection and testing according to the available testing procedures.

REPAIR

Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.

REPLACEMENT

Assistance in identifying suitable replacement units based on the existing model, controller, and machine configuration.

SOURCING

Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.

Important Before Ordering

To help identify the correct Mitsubishi MR-J4-40B-RJ servo amplifier, prepare the following information:

1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. Motion controller model and SSCNET III/H configuration.
5. Load-side encoder model, if used.
6. Photographs of communication connectors and wiring, if necessary.
7. Machine application and any existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.

Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.

Request Quotation

Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-40B-RJ Servo Amplifier.

Please provide the complete part number, servo motor model, motion controller model, and equipment nameplate photograph when requesting a quotation.

Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.