Mitsubishi MR-J4-40A-RJ Servo Drive
PRODUCT DESCRIPTION
Mitsubishi MR-J4-40A-RJ Servo Amplifier
Mitsubishi MR-J4-40A-RJ Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.4 kW (400 W) and uses a general-purpose interface for integration with compatible controllers and servo motors.
The MR-J4-40A-RJ is suitable for applications requiring accurate positioning, speed regulation, torque control, and supported external encoder feedback. Typical applications include automated assembly equipment, packaging machinery, positioning systems, and industrial production machinery requiring precise servo motion.
Product Overview
Mitsubishi MR-J4-40A-RJ functions as the power and motion control unit between a compatible controller and servo motor. It receives command signals, processes feedback, and regulates motor output according to the configured operating parameters.
This RJ variant of the MELSERVO-J4-A series provides additional capabilities compared with the standard MR-J4-40A, including support for specified external encoder configurations, positioning mode, compatibility with the MR-D30 functional safety unit, and DC power supply input under the conditions defined by Mitsubishi Electric.
The model supports general-purpose control methods, including pulse-train positioning commands and analog speed or torque commands in the applicable operating modes.
Model Identification
- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-40A-RJ
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: General-Purpose Interface, RJ variant
- Rated Output Capacity: 0.4 kW (400 W)
Technical Specifications
Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-40A-RJ
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.4 kW (400 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 2.8 A
Main Circuit Power Supply: Single-phase or three-phase 200–240 V AC, 50/60 Hz, subject to model specifications
DC Power Supply Input: 283–340 V DC, subject to specified operating conditions
Interface: General-Purpose Interface
Control Method: Sine-wave PWM control / current control
Position Command: Pulse train; up to 4 Mpulses/s with differential receiver
Communication: USB for MR Configurator2; RS-422/RS-485 for supported 1:n communication
Interface Power Supply: 24 V DC ±10%
Cooling: Natural cooling
Protection Rating: IP20, open type
Dynamic Brake: Built-in
External Encoder Interface: Supported differential ABZ-phase and specified full-closed-loop encoder configurations
Positioning Mode: Supported
Safety Function: STO; compatible with MR-D30 functional safety unit
Dimensions and Weight: Refer to the official model-specific dimensional drawing and specifications
Verify the complete electrical ratings, permitted power supply configurations, encoder requirements, and installation conditions against the official Mitsubishi Electric documentation before ordering or commissioning.
Main Features
1. General-Purpose Interface
The MR-J4-40A-RJ supports integration with compatible controllers through its general-purpose interface. It accepts pulse-train position commands and supports analog command inputs for speed and torque control in the applicable operating modes.
2. External Encoder Compatibility
The RJ variant supports specified differential ABZ-phase external encoders and applicable full-closed-loop configurations. These functions can enable compatible systems to use load-side feedback for positioning applications.
Encoder type, signal format, wiring, and controller compatibility must meet Mitsubishi Electric requirements.
3. Positioning Mode and DC Power Input
The MR-J4-40A-RJ supports positioning mode and DC power input under the conditions specified by the manufacturer. These capabilities provide additional configuration options for compatible industrial systems.
4. Advanced Servo Tuning and Safety
The MELSERVO-J4 platform includes automatic tuning, vibration suppression, adaptive filtering, and protective functions. The RJ model also supports the MR-D30 functional safety unit and STO functionality according to the applicable system configuration and safety requirements.
Compatible Equipment / Accessories
Mitsubishi MR-J4-40A-RJ is intended for use with compatible Mitsubishi Electric servo motors, controllers, encoders, and supporting accessories.
Potential equipment categories include:
- Compatible Mitsubishi Electric HG-series servo motors.
- Controllers supporting the required general-purpose command interface.
- Compatible motor power and encoder cables.
- Supported external encoders for applicable feedback configurations.
- Pulse-train command wiring and analog signal cables.
- MR-D30 functional safety unit where required.
- Compatible control circuit power supplies and regenerative accessories.
Compatibility must be verified against the exact motor model, encoder type, controller, cable specifications, and operating configuration.
The MR-J4-40A-RJ should not be assumed to be a direct replacement for the standard MR-J4-40A in every application. Check whether the existing system requires any of the RJ variant's additional functions.
Typical Industrial Applications
Industrial Automation
Used in automated equipment requiring precise motor movement and repeatable positioning.
Motion Control / Positioning
Suitable for compatible positioning systems using pulse-train commands and supported servo control modes.
Production Machinery
May be applied in assembly equipment, packaging machinery, inspection systems, and other production machines requiring servo-driven movement.
Full-Closed-Loop Applications
Can be considered for supported applications requiring external load-side encoder feedback, provided the encoder, wiring, and controller configuration meet the manufacturer's requirements.
MR-J4-40A-RJ Replacement & Maintenance
For maintenance, repair, replacement, or retrofit requirements, verify the complete model number and existing machine configuration before selecting a replacement.
Before replacement, check:
- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- External encoder type and feedback configuration.
- Controller type and command interface.
- Connector types, cables, and wiring.
- Parameter settings and safety configuration.
- Existing alarm codes and unit condition.
A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, motor, feedback, interface, and safety compatibility before installation.
Central Automation Solutions
Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.
NEW
Sourcing of new units, subject to stock availability and supplier confirmation.
REFURBISHED TESTED
Refurbished units that have undergone inspection and testing according to the available testing procedures.
REPAIR
Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.
REPLACEMENT
Assistance in identifying suitable replacement units based on the existing model and machine configuration.
SOURCING
Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.
Important Before Ordering
To help identify the correct Mitsubishi MR-J4-40A-RJ servo amplifier, prepare the following information:
1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. Controller model and command interface.
5. External encoder model, if used.
6. Photographs of connectors and wiring, if necessary.
7. Machine application and any existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.
Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.
Request Quotation
Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-40A-RJ Servo Amplifier.
Please provide the complete part number, servo motor model, controller model, and equipment nameplate photograph when requesting a quotation.
Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.
