Mitsubishi MR-J4-20B-RJ Servo Drive

Mitsubishi MR-J4-20B-RJ Servo Drive
INDUSTRIAL AUTOMATION PRODUCT

Mitsubishi MR-J4-20B-RJ Servo Drive

Product Type: Servo Drive

Part Number: MR-J4-20B-RJ

Rp 18.500.000
New Refurbished Repair Replacement Sourcing
PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

Mitsubishi MR-J4-20B-RJ Servo Amplifier

Mitsubishi MR-J4-20B-RJ Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.2 kW (200 W) and uses the SSCNET III/H communication interface to connect with compatible Mitsubishi Electric motion controllers.

The MR-J4-20B-RJ is suitable for applications requiring accurate positioning, coordinated motion control, and reliable servo motor operation. Typical applications include automated assembly equipment, packaging machinery, positioning systems, and production machinery configured for SSCNET III/H communication.

Product Overview

Mitsubishi MR-J4-20B-RJ functions as the power and motion control unit between a compatible motion controller and servo motor. It receives motion commands through the SSCNET III/H optical communication network, processes control instructions, and regulates motor output according to the configured operating parameters.

As an RJ variant of the MELSERVO-J4-B series, this model supports additional load-side encoder interface options, including specified two-wire and four-wire communication methods and differential A/B/Z-phase input signals. These capabilities can support compatible full-closed-loop motion control configurations.

The amplifier also incorporates advanced servo tuning, vibration suppression, diagnostic, and protective functions. Its SSCNET III/H interface supports high-speed communication with compatible motion controllers.

Model Identification

- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-20B-RJ
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: SSCNET III/H, RJ variant
- Rated Output Capacity: 0.2 kW (200 W)

Technical Specifications

Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-20B-RJ
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.2 kW (200 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 1.5 A
Main Circuit Power Supply: Single-phase or three-phase 200–240 V AC, 50/60 Hz
DC Power Supply Input: 283–340 V DC, subject to model and software requirements
Interface: SSCNET III/H
Control Method: Sine-wave PWM control / current control
SSCNET III/H Communication Cycle: 0.222 ms, 0.444 ms, or 0.888 ms
Communication for Setup: USB connection to a compatible PC using MR Configurator2
Interface Power Supply: 24 V DC ±10%
Load-Side Encoder Interface: Mitsubishi high-speed serial communication and differential A/B/Z-phase input
Encoder Communication: Supported two-wire and four-wire configurations
Cooling: Natural cooling
Protection Rating: IP20, open type
Dynamic Brake: Built-in
Safety Function: Safe Torque Off (STO), IEC/EN 61800-5-2
Mass: Approx. 0.8 kg

DC input operation is subject to the applicable model and software requirements. Verify the nameplate and official instruction manual before installation. The specifications above are not a substitute for the complete manufacturer documentation.

Main Features

1. SSCNET III/H Communication

The MR-J4-20B-RJ uses SSCNET III/H optical communication to connect with compatible Mitsubishi Electric motion controllers. The network supports high-speed communication and coordinated servo operation in suitable automation architectures.

2. Advanced Load-Side Encoder Interface

The RJ variant supports specified load-side encoder configurations, including two-wire and four-wire communication methods and differential A/B/Z-phase input signals. This enables compatible applications to use external feedback for full-closed-loop control.

Encoder type, signal format, wiring, and controller compatibility must be verified against Mitsubishi Electric documentation.

3. Advanced Servo Tuning and Vibration Suppression

The MELSERVO-J4 platform incorporates advanced vibration suppression control, adaptive filtering, robust filtering, auto tuning, and one-touch tuning. These functions help technicians optimize servo response and reduce vibration caused by machine mechanics.

4. Integrated Diagnostics and Safety

The amplifier includes protective functions for conditions such as overcurrent, overload, regenerative overvoltage, undervoltage, encoder errors, and excessive speed. Additional functions include drive recording and machine diagnosis.

The model supports Safe Torque Off (STO) according to the applicable safety specifications. Correct installation, wiring, and machine-level safety validation remain necessary.

Compatible Equipment / Accessories

Mitsubishi MR-J4-20B-RJ is designed for use with compatible Mitsubishi Electric motion controllers, servo motors, and accessories within an SSCNET III/H motion control system.

Potential equipment categories include:

- Mitsubishi Electric motion controllers supporting SSCNET III/H.
- Compatible HG-series servo motors, subject to the official motor-amplifier combination table.
- SSCNET III/H optical communication cables.
- Compatible motor power and encoder cables.
- Supported load-side encoders for applicable feedback configurations.
- Control circuit power supplies and wiring accessories.
- Regenerative components where required by the application.

Compatibility must be confirmed against the exact servo motor model, motion controller, encoder configuration, communication cables, connectors, and machine requirements.

Important: The MR-J4-20B-RJ is not interchangeable solely on the basis of its 200 W rating with the MR-J4-20A-RJ general-purpose interface model or the standard MR-J4-20B. Confirm the communication interface and required RJ functions before selecting a replacement.

Typical Industrial Applications

Industrial Automation

Used in automated production equipment requiring coordinated servo control through compatible Mitsubishi Electric motion controllers.

Motion Control / Positioning

Suitable for positioning and synchronized motion applications using SSCNET III/H communication.

Production Machinery

May be applied in compatible assembly machines, packaging equipment, inspection machinery, and other production systems requiring precise servo-driven movement.

Full-Closed-Loop Applications

Can be considered for compatible applications requiring load-side encoder feedback. The encoder, wiring, motion controller, and control configuration must meet the manufacturer's requirements.

MR-J4-20B-RJ Replacement & Maintenance

For maintenance, repair, replacement, or retrofit requirements, verify the complete servo amplifier model and existing machine configuration before selecting a replacement.

Before replacement, check:

- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- Motion controller compatibility with SSCNET III/H.
- Load-side encoder type and feedback configuration.
- Optical communication cables and connectors.
- Motor power cables and encoder wiring.
- Parameter settings and safety configuration.
- Existing alarm codes and unit condition.

A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, communication, motor, encoder, and safety compatibility before installation.

Central Automation Solutions

Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.

NEW

Sourcing of new units, subject to stock availability and supplier confirmation.

REFURBISHED TESTED

Refurbished units that have undergone inspection and testing according to the available testing procedures.

REPAIR

Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.

REPLACEMENT

Assistance in identifying suitable replacement units based on the existing model, controller, and machine configuration.

SOURCING

Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.

Important Before Ordering

To help identify the correct Mitsubishi MR-J4-20B-RJ servo amplifier, prepare the following information:

1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. Motion controller model and SSCNET III/H configuration.
5. Load-side encoder model, if used.
6. Photographs of communication connectors and wiring, if necessary.
7. Machine application and any existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.

Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.

Request Quotation

Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-20B-RJ Servo Amplifier.

Please provide the complete part number, servo motor model, motion controller model, and equipment nameplate photograph when requesting a quotation.

Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.