Mitsubishi MR-J4-20A-RJ Servo Drive

Mitsubishi MR-J4-20A-RJ Servo Drive
INDUSTRIAL AUTOMATION PRODUCT

Mitsubishi MR-J4-20A-RJ Servo Drive

Product Type: Servo Drive

Part Number: MR-J4-20A-RJ

Rp 20.500.000
New Refurbished Repair Replacement Sourcing
PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

Mitsubishi MR-J4-10A-RJ Servo Amplifier

Mitsubishi MR-J4-10A-RJ Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.1 kW (100 W) and uses a general-purpose interface for integration with compatible controllers and servo motors.

The MR-J4-10A-RJ is suitable for applications requiring accurate positioning, speed control, torque control, and specialized encoder feedback configurations. Typical applications include automated assembly equipment, positioning systems, production machinery, and industrial equipment requiring precise servo motion.

Product Overview

Mitsubishi MR-J4-10A-RJ functions as the power and motion control unit between a compatible controller and servo motor. It receives command signals, processes feedback, and regulates motor output according to the configured operating parameters.

This RJ variant provides additional capabilities compared with the standard MR-J4-10A, including support for specified external encoder configurations, positioning mode, compatibility with the MR-D30 functional safety unit, and DC power supply input under the conditions defined by Mitsubishi Electric.

The model supports general-purpose control methods, including pulse-train positioning commands and analog speed or torque commands in the applicable operating modes.

Model Identification

- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-10A-RJ
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: General-Purpose Interface, RJ variant
- Rated Output Capacity: 0.1 kW (100 W)

Technical Specifications

Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-10A-RJ
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.1 kW (100 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 1.1 A
Main Circuit Power Supply: Single-phase or three-phase 200–240 V AC, 50/60 Hz
DC Power Supply Input: 283–340 V DC
Interface: General-Purpose Interface
Control Method: Sine-wave PWM control / current control
Position Command: Pulse train; up to 4 Mpulses/s with differential receiver
Communication: USB for MR Configurator2; RS-422/RS-485 for supported 1:n communication
Interface Power Supply: 24 V DC ±10%
Cooling: Natural cooling
Protection Rating: IP20, open type
Dynamic Brake: Built-in
External Encoder Interface: Supported differential ABZ-phase and specified full-closed-loop encoder configurations
Positioning Mode: Supported
Safety Function: STO; compatible with MR-D30 functional safety unit
Dimensions (W × H × D): Approx. 40 × 168 × 135 mm
Weight: Approx. 0.8 kg

Refer to the official Mitsubishi Electric specifications and instruction manual for electrical limits, encoder wiring requirements, operating conditions, and safety installation details.

Main Features

1. General-Purpose Interface

The MR-J4-10A-RJ supports integration with compatible controllers through a general-purpose interface. It accepts pulse-train position commands and supports analog command inputs for speed and torque control under the appropriate operating modes.

2. External Encoder Compatibility

The RJ variant supports specified differential ABZ-phase external encoders. It can also support four-wire external encoder communication in applicable full-closed-loop configurations. These functions allow compatible systems to use load-side feedback for improved positioning performance.

Encoder type, signal format, wiring, and controller configuration must meet Mitsubishi Electric requirements.

3. Positioning Mode and DC Power Input

The MR-J4-10A-RJ supports positioning mode and DC power input within the specified operating range. These functions provide additional configuration options for compatible industrial systems.

4. Advanced Servo Tuning and Safety

The MELSERVO-J4 platform includes automatic tuning, vibration suppression, adaptive filtering, and protective functions. The RJ model also supports the MR-D30 functional safety unit and STO functionality according to the applicable system configuration and safety requirements.

Compatible Equipment / Accessories

Mitsubishi MR-J4-10A-RJ is designed for use with compatible Mitsubishi Electric servo motors, controllers, encoders, and supporting accessories.

Potential equipment categories include:

- Compatible Mitsubishi Electric HG-series servo motors.
- Controllers supporting the required general-purpose command interface.
- Compatible motor power and encoder cables.
- Supported external encoders for applicable feedback configurations.
- Pulse-train command wiring and analog signal cables.
- MR-D30 functional safety unit where required.
- Compatible control circuit power supplies and regenerative accessories.

Verify compatibility against the exact motor model, encoder type, controller, cable specifications, and operating configuration before installation.

The MR-J4-10A-RJ can be used as an MR-J4-10A in supported configurations, according to Mitsubishi Electric documentation. However, the additional RJ functions and the requirements of the existing system must be considered when selecting a replacement.

Typical Industrial Applications

Industrial Automation

Used in automated equipment requiring precise motor movement and repeatable positioning.

Motion Control / Positioning

Suitable for compatible positioning systems using pulse-train commands and supported servo control modes.

Production Machinery

May be applied in assembly equipment, packaging machinery, inspection systems, and other production machines requiring servo-driven movement.

Full-Closed-Loop Applications

Can be considered for supported applications requiring external load-side encoder feedback, provided the encoder, wiring, and controller configuration meet the manufacturer's requirements.

MR-J4-10A-RJ Replacement & Maintenance

For maintenance, repair, replacement, or retrofit requirements, verify the complete model number and existing machine configuration before selecting a replacement.

Before replacement, check:

- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- External encoder type and feedback configuration.
- Controller type and command interface.
- Connector types, cables, and wiring.
- Parameter settings and safety configuration.
- Existing alarm codes and unit condition.

A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, motor, feedback, interface, and safety compatibility before installation.

Central Automation Solutions

Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.

NEW

Sourcing of new units, subject to stock availability and supplier confirmation.

REFURBISHED TESTED

Refurbished units that have undergone inspection and testing according to the available testing procedures.

REPAIR

Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.

REPLACEMENT

Assistance in identifying suitable replacement units based on the existing model and machine configuration.

SOURCING

Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.

Important Before Ordering

To help identify the correct Mitsubishi MR-J4-10A-RJ servo amplifier, prepare the following information:

1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. Controller model and command interface.
5. External encoder model, if used.
6. Photographs of connectors and wiring, if necessary.
7. Machine application and any existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.

Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.

Request Quotation

Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-10A-RJ Servo Amplifier.

Please provide the complete part number, servo motor model, controller model, and equipment nameplate photograph when requesting a quotation.

Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.