Mitsubishi MR-J4-500GF Servo Drive

Mitsubishi MR-J4-500GF Servo Drive
INDUSTRIAL AUTOMATION PRODUCT

Mitsubishi MR-J4-500GF Servo Drive

Product Type: Servo Drive

Part Number: MR-J4-500GF

Rp 58.750.000
New Refurbished Repair Replacement Sourcing
PRODUCT DESCRIPTION

Mitsubishi MR-J4-500GF Servo Amplifier – 5 kW, CC-Link IE Field Network, MELSERVO-J4

PRODUCT DESCRIPTION

Product Overview

The Mitsubishi Electric MR-J4-500GF is a 5 kW AC servo amplifier from the MELSERVO-J4 series, designed for high-performance industrial motion control applications. It features an integrated CC-Link IE Field Network interface, enabling communication with compatible Mitsubishi PLCs, network master modules, and industrial automation systems.

The servo amplifier supports precise positioning, speed control, and torque control. When integrated with a compatible controller, it can perform point-table positioning and support synchronized or interpolated motion through an appropriate Simple Motion system.

With high-resolution encoder support, advanced servo tuning, and vibration suppression functions, the MR-J4-500GF is suitable for production machinery requiring accurate motion control and network-based integration.

Model Identification

- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model / Part Number: MR-J4-500GF
- Product Type: AC Servo Amplifier / Servo Drive
- Rated Capacity: 5 kW
- Communication Interface: CC-Link IE Field Network
- Voltage Class: 200 V
- Dynamic Brake: Built-in
- Safety Function: Safe Torque Off (STO)

Technical Specifications

Parameter: Specification
Manufacturer: Mitsubishi Electric
Servo Series: MELSERVO-J4
Model: MR-J4-500GF
Rated Capacity: 5 kW
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 28.0 A
Main AC Power Supply: 200–240 V AC, 50/60 Hz; verify required phase configuration in the official manual
Main Circuit Rated Input Current: 21.7 A
Main DC Power Supply Input: 283–340 V DC, where applicable
Control Power Supply: Single-phase 200–240 V AC, 50/60 Hz
Interface Power Supply: 24 V DC ±10%
Communication Interface: CC-Link IE Field Network
Communication Cycle: 0.5, 1.0, 2.0, or 4.0 ms, depending on configuration
Encoder Resolution: 22-bit, 4,194,304 pulses/revolution
Speed Frequency Response: Up to 2.5 kHz
Control Method: Sine-wave PWM control / current control
Dynamic Brake: Built-in
Fully Closed-Loop Control: Supported with compatible configuration
Setup and Monitoring: USB connection with compatible MR Configurator2 software
Safety Function: STO, subject to applicable configuration and safety requirements

Specifications are based on Mitsubishi Electric documentation. Verify the required input phase, wiring, protection devices, and installation conditions for the exact unit before commissioning.

Main Features

- 5 kW rated capacity for demanding industrial servo applications.
- Integrated CC-Link IE Field Network communication.
- Network-based positioning, monitoring, and parameter access with compatible equipment.
- Point-table positioning capability.
- Synchronized and interpolation control when used with a compatible Simple Motion system.
- High-resolution encoder feedback for precise positioning.
- Advanced servo tuning and vibration suppression functions.
- Built-in dynamic braking.
- Fully closed-loop control support with compatible feedback equipment.
- STO safety functionality.
- USB connectivity for setup and monitoring using compatible MR Configurator2 software.

Compatible Equipment and Accessories

The MR-J4-500GF is designed for use with compatible Mitsubishi automation and motion-control equipment.

Potential system components include:

- Mitsubishi PLCs with a compatible CC-Link IE Field Network master interface.
- Compatible Mitsubishi Simple Motion modules for advanced motion control.
- Compatible Mitsubishi HG-series servo motors, subject to the official motor-amplifier combination table.
- Matching servo motor power and encoder cables.
- Compatible machine-side encoder equipment for supported full-closed-loop applications.
- Approved regenerative and installation accessories, where required.

Important: Verify the PLC or motion controller, network configuration, motor model, encoder arrangement, power supply, and cable requirements before ordering.

Typical Industrial Applications

- Automated production and assembly lines.
- Packaging and processing machinery.
- CNC and precision positioning equipment.
- Material-handling and transfer systems.
- Multi-axis machinery requiring synchronized motion.
- Industrial systems using CC-Link IE Field Network for drive integration.

MR-J4-500GF Replacement and Maintenance

When replacing an existing servo amplifier, verify the complete model number, motor rating, input power requirements, network interface, controller compatibility, feedback arrangement, parameters, and safety configuration.

The MR-J4-500GF is a 200 V-class CC-Link IE Field Network model. It should not be assumed interchangeable with:

- MR-J4-500A: General-purpose interface.
- MR-J4-500B: SSCNET III/H interface.
- MR-J4-500GF-RJ: RJ variant with additional supported functions.
- MR-J4-500GF4: 400 V-class version.

Product Lifecycle and Replacement Planning

Mitsubishi Electric lists the MR-J4-500GF as scheduled for order discontinuation in March 2028 and production discontinuation in March 2029. The manufacturer lists MR-J5-500G as a replacement candidate.

Before changing to an MR-J5 model, verify motor compatibility, controller and network requirements, cabling, parameters, mounting, safety configuration, and the applicable migration documentation.

Central Automation Solutions

Central Automation provides industrial automation sourcing and support for Mitsubishi servo amplifiers, including:

- New Units: Supply subject to availability.
- Tested / Refurbished Units: Condition and test status confirmed upon quotation.
- Repair Services: Fault assessment and repair options subject to inspection.
- Replacement Support: Assistance identifying compatible replacement equipment.
- Industrial Sourcing: Sourcing assistance for hard-to-find and special-order automation components.

Important Before Ordering

Please provide the following details when requesting a quotation:

1. Exact model: MR-J4-500GF.
2. Required condition: new, tested/refurbished, or repair.
3. Existing servo motor model.
4. PLC or motion controller model.
5. Required quantity and delivery destination.

A clear photo of the existing unit's nameplate is recommended to confirm the exact model and voltage class.

Request a Quotation

Contact Central Automation for pricing, stock availability, unit condition, lead time, and compatibility confirmation for the Mitsubishi MR-J4-500GF Servo Amplifier.

Official Mitsubishi Electric References

- [Official MR-J4-500GF Product Features and Lifecycle Information](https://www.mitsubishielectric.co.jp/fa/products/faspec/point.page?formNm=MR-J4-500GF&kisyu=%2Fservo)
- [Official MR-J4-500GF Technical Documentation and Downloads](https://www.mitsubishielectric.co.jp/fa/products/faspec/download.page?formNm=J4GFMR-J4-500GF5376&kisyu=%2Fservo&popup=1)
- [Mitsubishi Electric – CC-Link IE Field Network Servo Amplifier Lineup](https://www.mitsubishielectric.com/fa/iden/products/cnt/plcnet/pmerit/cclinkie/lineup/drv.html)
- [MR-J4-GF Servo Amplifier Instruction Manual (PDF)](https://dl.mitsubishielectric.com/dl/fa/document/manual/servo/sh030218eng/sh030218engg.pdf)
- [MELSERVO-J4 Product Catalog (PDF)](https://dl.mitsubishielectric.com/dl/fa/document/catalog/servo/l03058/l03058engj.pdf)