Mitsubishi MR-J4-60A Servo Drive

Mitsubishi MR-J4-60A Servo Drive
INDUSTRIAL AUTOMATION PRODUCT

Mitsubishi MR-J4-60A Servo Drive

Product Type: Servo Drive

Part Number: MR-J4-60A

Rp 10.900.000
New Refurbished Repair Replacement Sourcing
PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

Mitsubishi MR-J4-60A Servo Amplifier

Mitsubishi MR-J4-60A Servo Amplifier is a digital AC servo amplifier from the MELSERVO-J4 series, designed for precise motor control in industrial automation systems. This model has a rated output capacity of 0.6 kW (600 W) and uses a general-purpose interface to connect with compatible motion controllers and machine control systems.

The MR-J4-60A is suitable for applications requiring accurate positioning, speed regulation, and torque control. Typical applications include automated assembly equipment, packaging machinery, material handling systems, and production machinery configured for compatible servo control.

Product Overview

Mitsubishi MR-J4-60A functions as the power and control unit between a compatible controller and servo motor. It receives motion command signals, processes motor feedback, and regulates motor output according to the configured operating parameters.

As part of the MELSERVO-J4 series, this model supports pulse-train positioning commands and analog speed or torque commands in the applicable operating modes. It also incorporates advanced servo tuning, resonance suppression, and vibration suppression functions to help optimize machine performance.

The MR-J4-60A uses a general-purpose interface. It differs from the MR-J4-60B, which uses SSCNET III/H, and the MR-J4-60GF, which uses CC-Link IE Field Network.

Model Identification

- Brand: Mitsubishi Electric
- Series: MELSERVO-J4
- Model: MR-J4-60A
- Product Type: Digital AC Servo Amplifier
- Interface / Configuration: General-Purpose Interface
- Rated Output Capacity: 0.6 kW (600 W)

Technical Specifications

Specification: Details
Brand: Mitsubishi Electric
Series: MELSERVO-J4
Model: MR-J4-60A
Product Type: AC Servo Amplifier
Rated Output Capacity: 0.6 kW (600 W)
Rated Output Voltage: 3-phase 170 V AC
Rated Output Current: 3.2 A
Main Circuit Power Supply: Single-phase or three-phase 200–240 V AC, 50/60 Hz
Control Circuit Power Supply: Single-phase 200–240 V AC, 50/60 Hz
Interface: General-Purpose Interface
Control Method: Sine-wave PWM control / current control
Position Command: Pulse train; up to 4 Mpulses/s with differential receiver
Communication: USB for MR Configurator2; RS-422/RS-485 for supported 1:n communication
Interface Power Supply: 24 V DC ±10%
Cooling: Natural cooling
Protection Rating: IP20, open type
Dynamic Brake: Built-in
Dimensions (W × H × D): Approx. 40 × 168 × 135 mm
Weight: Approx. 0.8 kg

Confirm the complete electrical ratings, installation requirements, and dimensional details against the official Mitsubishi Electric documentation before ordering or commissioning.

Main Features

1. General-Purpose Interface

The MR-J4-60A supports integration with compatible controllers through its general-purpose interface. It accepts pulse-train commands for positioning and supports analog command inputs for speed and torque control in the applicable operating modes.

2. Precision Servo Motor Control

The MELSERVO-J4 platform uses closed-loop servo control to regulate motor movement. When paired with a compatible motor and controller, it supports accurate positioning, controlled speed, and responsive motion performance.

3. Advanced Servo Tuning

The series includes one-touch tuning, auto tuning, resonance suppression filtering, and vibration suppression functions. These features help technicians optimize servo response and address mechanical resonance in compatible machine configurations.

4. Integrated Protection and Diagnostics

The amplifier incorporates protective functions for abnormal operating conditions, including overcurrent, overload, regenerative overvoltage, and other monitored faults. Diagnostic tools and parameter adjustment functions support troubleshooting and maintenance.

Compatible Equipment / Accessories

Mitsubishi MR-J4-60A is intended for use with compatible Mitsubishi Electric servo motors, controllers, and supporting accessories.

Potential equipment categories include:

- Compatible Mitsubishi Electric HG-series servo motors.
- PLCs or motion controllers supporting the general-purpose command interface.
- Compatible motor power and encoder cables.
- Pulse-train command wiring and analog signal cables.
- 24 V DC interface power supply.
- Regenerative components where required by the application.

Compatibility must be verified against the exact servo motor model, controller interface, encoder configuration, cable specifications, and machine requirements.

Do not assume that a motor or accessory is compatible solely because it belongs to the same product family.

Typical Industrial Applications

Industrial Automation

Used in automated machinery requiring controlled motor movement, repeatable positioning, and coordinated machine operations.

Motion Control / Positioning

Suitable for compatible positioning systems using pulse-train commands and supported servo control modes.

Production Machinery

May be applied in assembly machines, packaging equipment, material handling systems, and other production machinery requiring servo-driven movement.

Machine Retrofit and Maintenance

Can be considered for replacement or retrofit projects involving existing general-purpose servo control systems, subject to electrical, motor, and interface compatibility.

MR-J4-60A Replacement & Maintenance

For maintenance, repair, replacement, or retrofit requirements, verify the complete servo amplifier model and existing machine configuration before selecting a replacement.

Before replacement, check:

- Complete servo amplifier model and nameplate.
- Rated output capacity and power supply requirements.
- Existing servo motor model and encoder.
- Controller type and command interface.
- Motor power cables and encoder wiring.
- Command signal wiring and connectors.
- Parameter settings and operating mode.
- Existing alarm codes and unit condition.

A servo amplifier with the same rated capacity is not necessarily a direct replacement. Confirm electrical, motor, feedback, and interface compatibility before installation.

Central Automation Solutions

Central Automation supports industrial automation procurement and technical requirements through the following options, subject to availability and service capability.

NEW

Sourcing of new units, subject to stock availability and supplier confirmation.

REFURBISHED TESTED

Refurbished units that have undergone inspection and testing according to the available testing procedures.

REPAIR

Assessment and repair support for servo amplifiers experiencing alarms, faults, or operational problems, subject to inspection.

REPLACEMENT

Assistance in identifying suitable replacement units based on the existing model and machine configuration.

SOURCING

Product sourcing based on the complete part number, nameplate photographs, equipment photographs, and application requirements.

Important Before Ordering

To help identify the correct Mitsubishi MR-J4-60A servo amplifier, prepare the following information:

1. Complete servo amplifier part number.
2. Photograph of the product nameplate.
3. Existing servo motor model number.
4. PLC or motion controller model.
5. Command interface and wiring configuration.
6. Photographs of connectors and wiring, if necessary.
7. Machine application and existing alarm codes.
8. Required solution: new, refurbished tested, repair, replacement, or sourcing.

Central Automation can assist with product identification, availability checks, and compatibility assessment before quotation.

Request Quotation

Contact Central Automation for product availability, pricing, technical information, compatibility checks, and sourcing assistance for Mitsubishi MR-J4-60A Servo Amplifier.

Please provide the complete part number, servo motor model, controller model, and equipment nameplate photograph when requesting a quotation.

Central Automation — Industrial Automation Products, Repair, Replacement & Sourcing.